How To Replace A Broken Floor Tile

How to Replace a Broken Floor Tile

A broken floor tile can be an eyesore and a hazard. If you have a broken tile, it's important to replace it as soon as possible. Here's a step-by-step guide on how to do it.

Step 1: Gather your tools and materials

You will need the following tools and materials:

Replacement tile
Tile adhesive
Grout
Grout float
Sponge
Bucket
Safety glasses
Gloves
Hammer
Chisel
Pry bar

Step 2: Prepare the area

Put on your safety glasses and gloves. Clear the area around the broken tile of any furniture or other objects.

Step 3: Remove the broken tile

Use a hammer and chisel to carefully break up the broken tile into small pieces. Use a pry bar to gently pry up the pieces of the tile and remove them.

Step 4: Clean the area

Use a sponge and bucket of water to clean the area where the tile was removed. Make sure to remove all of the old adhesive and grout.

Step 5: Apply the tile adhesive

Spread a thin layer of tile adhesive to the back of the replacement tile. Use a notched trowel to evenly distribute the adhesive.

Step 6: Set the tile

Carefully set the replacement tile in place. Press down firmly to ensure that it is level with the surrounding tiles.

Step 7: Grout the tile

Use a grout float to apply grout to the joints between the replacement tile and the surrounding tiles. Press the grout into the joints firmly.

Step 8: Clean the tile

Use a sponge and bucket of water to clean the tile and remove any excess grout. Make sure to wipe the tile in a circular motion to avoid scratching it.