How Do You Regrout Bathroom Floor Tiles

Regrouting bathroom floor tiles is a job that can be done by any homeowner with a little time and effort. The process is not difficult, but it is important to follow the steps carefully to ensure that the new grout is properly installed and sealed.

Materials You'll Need

* Grout removal tool * Grout float * Bucket * Sponge * Grout * Grout sealer

Step-by-Step Instructions

Remove the old grout.

Use a grout removal tool to remove the old grout from the joints between the tiles. Be careful not to damage the tiles. 2.

Clean the joints.

Once the old grout has been removed, clean the joints between the tiles with a sponge and water. This will remove any remaining dust or debris. 3.

Mix the grout.

Mix the grout according to the manufacturer's instructions. The grout should be mixed to a smooth, workable consistency. 4.

Apply the grout.

Use a grout float to apply the grout to the joints between the tiles. Press the grout into the joints firmly, but be careful not to overfill them. 5.

Smooth the grout.

Once the grout has been applied, use a grout float to smooth the surface of the grout. This will help to remove any excess grout and create a smooth, even finish. 6.

Clean the tiles.

Once the grout has been smoothed, use a sponge to clean the tiles. This will remove any excess grout from the surface of the tiles. 7.

Seal the grout.

Once the grout has dried, seal it with a grout sealer. This will help to protect the grout from stains and moisture.

Tips

* When removing the old grout, be careful not to damage the tiles. * Clean the joints between the tiles thoroughly before applying the new grout. * Mix the grout according to the manufacturer's instructions. * Apply the grout firmly to the joints between the tiles, but be careful not to overfill them. * Smooth the surface of the grout once it has been applied. * Clean the tiles after the grout has been applied. * Seal the grout once it has dried.