Cost To Recoat Hardwood Floors

The cost to recoat hardwood floors can vary depending on a number of factors, including the size of the area to be refinished, the condition of the existing finish, and the type of finish you choose. However, as a general rule, you can expect to pay between $1 and $5 per square foot for recoating hardwood floors.

The first step in refinishing hardwood floors is to remove the existing finish. This can be done by sanding or by using a chemical stripper. Sanding is the more common method, and it is typically done with a drum sander or a belt sander. Chemical strippers can be used to remove finishes that are in poor condition, but they can be more time-consuming and expensive than sanding.

Once the existing finish has been removed, the floor must be cleaned and sanded to prepare it for the new finish. This process typically involves using a sanding block or a sanding pole to smooth the surface of the floor and remove any imperfections.

The next step is to apply the new finish. The type of finish you choose will depend on your desired look and budget. Water-based finishes are the most common type of finish, and they are typically less expensive than oil-based finishes. Oil-based finishes provide a more durable finish, but they can be more difficult to apply.

Once the finish has been applied, it must be allowed to dry completely. The drying time will vary depending on the type of finish used, but it typically takes several days for the finish to fully cure.

Recoating hardwood floors is a relatively simple process, but it is important to follow the steps carefully to ensure a professional-looking finish. If you are not comfortable refinishing hardwood floors yourself, you can hire a professional to do the job for you.

Here are some tips for recoating hardwood floors:

Make sure the floor is clean and free of dirt and debris before you begin.
Use a sanding block or a sanding pole to smooth the surface of the floor and remove any imperfections.
Apply the new finish in thin, even coats.
Allow the finish to dry completely before walking on the floor.

By following these tips, you can achieve a beautiful, professional-looking finish on your hardwood floors.