How To Re Grout Floor Tiles

Re-grouting floor tiles is a relatively simple and inexpensive way to refresh the look of your bathroom or kitchen. It can also help to prevent water damage and mold growth. With a little time and effort, you can easily re-grout your floor tiles yourself.

Materials You Will Need:

New grout
Grout float
Grout sponge
Bucket of water
Caulk gun
Caulk

Steps:

1. Prepare the Area:
Before you begin, clean the floor tiles and grout with a mild cleaner. This will help to remove any dirt or debris that could interfere with the new grout. Once the tiles are clean, allow them to dry completely.

2. Remove the Old Grout:
Use a grout saw or a utility knife to remove the old grout. Be careful not to damage the tiles. If the grout is particularly stubborn, you can use a chemical grout remover to help soften it.

3. Clean the Tile Edges:
Once the old grout has been removed, clean the edges of the tiles thoroughly with a damp sponge. This step is important to ensure that the new grout will adhere properly.

4. Apply New Grout:
Using a grout float, apply the new grout to the cleaned tile edges. Press the grout into the joints between the tiles, making sure to fill them completely. Remove any excess grout with the sponge.

5. Clean the Grout:
Once the grout has been applied, clean it with a damp sponge. This will help to smooth the surface of the grout and remove any excess moisture.

6. Apply Caulk:
If there are any gaps between the tiles and the wall or other surfaces, apply a bead of caulk to seal them. This will help to prevent water damage and mold growth.

7. Allow the Grout to Cure:
Allow the grout to cure for the amount of time specified by the manufacturer. This is typically 24 to 48 hours. During this time, keep the floor dry and avoid walking on it.

8. Seal the Grout:
Once the grout has cured, seal it with a grout sealer to protect it from water and stains. This step is highly recommended to prolong the life of your grout.

Tips:

Make sure to select the right type of grout for your floor tiles. There are different types of grout available, so be sure to read the labels carefully before you make a selection.
Apply the grout in small sections at a time to prevent the grout from drying out too quickly.
Use a grout float that is the right size for the joints between your tiles.
Don't be afraid to apply more grout if needed. It's better to have too much grout than not enough.
Allow the grout to cure for the full amount of time specified by the manufacturer.
Seal the grout to protect it from water and stains.